Contact Us

How to Install Pre-Seeded DuraGrass™

Step-by-step instructions to install DuraGrass with attached seed blanket

Install Pre-Seeded Duragrass in minutes

It’ll be the easiest thing you check off your to-do list. The seed blanket is already attached to the DuraGrass, so the difficult part is taken care of. The weight of the hybrid turf will keep the seed blanket in contact with the ground to help grow new grass in your lawn. Follow these steps below for a great experience…and then utilize the PRO TIPS to truly master your yard.

1

Ground Preparation

SIMPLE PREPARATIoN STEPS

  • Cut current grass and weeds down as low as you can
  • Use a hard rake to churn up top 1" of soil
  • Sprinkle topsoil as needed
  • Compact and level the ground

PRO TIPS

  • Remove all weeds and grass so you are starting with a soil-only area
  • Use a lawn roller or hand tamper to level the soil

2

DURAGRASS INSTALLATION

placement & anchoring

  • Secure side 1 to the ground with provided biodegradable anchors and a rubber mallet
  • Pull DuraGrass from opposite end and use provided anchors to secure side 2
  • Cut to fit your desired space​
  • Secure the 3rd side with provided anchors
  • If you are installing multiple pieces of DuraGrass next to each other, use the "t" shape of the anchor to secure 2 pieces together.
  • If not installing multiple pieces together, or when ready to complete installation, use provided anchors to secure the 4th side.

PRO TIPS

  • We recommend using an anchor every 12"-18"
  • There is a natural bias of the artificial turf blades, when installing multiple pieces, make sure the bias leans the same direction.
  • DuraGrass is best installed on sunny days at 80˚+. This will keep it from stretching later. However, it can be installed in any weather.

3

On-Going Maintenance

ENSURE LONG Life

  • Water DuraGrass and the soil beneath it multiple times a day to keep it wet
  • Mow as you normally would
  • Ove-rseed in fall and spring (or as your climate dictates) as needed
  • Inspect anchors from time to time, use rubber mallet to re-secure anchors as needed

PRO TIPS

  • Keep DuraGrass and the soil below it wet until grass has reached about 3" in height
  • Over-seed if you find areas that are not growing in as desired

Additional installation videos

Anchoring DuraGrass

Installing Larger, Non-Seeded DuraGrass Rolls

Installing Non-Seeded DuraGrass Patch

tools you'll need

Rake
Rake
Scissors
Scissors
Rubber-Mallet
Rubber-Mallet
Gloves
Gloves
BUY NOW

SEE DURAGRASS IN ACTION

Move the green and orange bars to see stages of grass growth through DuraGrass.
These images represent how quickly, and potential “fullness” of the grass that can grow through DuraGrass.

TIPS & TRICKS

ANCHORING

Included with every piece or roll of DuraGrass are biodegradable anchors. We supply enough anchors to secure the borders every 18″. The unique design of our anchors fit through the perforations easily and the “T” shaped top will lock 2 pieces of DuraGrass together.

WE STRONGLY ADVISE YOU TO NOT USE METAL STAPLES OR STAKES. Metal can be dangerous to people and pets, and we want you to have a safe and enjoyable experience on DuraGrass.

It is best to use a rubber mallet to drive the anchors into the ground. This will limit the chance of breaking off the arms of the anchors during installation.

The anchors should biodegrade in 3-5 years

DuraGrass-Anchors
IMG_8174

CUTTING TO SHAPE

We understand that most of the troublesome problem areas are not perfectly square. To match the area you want to patch, you can use shears or household scissors to cut DuraGrass to the shape you need.

PRODUCT DETAILS

PRE-SEEDED DURAGRASS

BUY NOW

Contact Us

Products

Products Coming Soon!

Quick Links

DuraGrass™ is the only product that is instantly green, boosts grass growth and protects the grass to regrow. Fix problem areas in your lawn for good!

DuraGrass™ is a GrassWorx, LLC Innovation.

© 2024 GrassWorx, LLC. All rights reserved. DuraGrass™ is a trademark of GrassWorx, LLC. Made in the U.S.A.